OPEN/CLOSED SENSOR

Product introduction

1. Introduction
   The smart door/window sensor is a smart device with a built-in ZigBee module. It works as a ZigBee terminal added in the ZigBee network. Users can install a SparxSmart App on their iOS or Andriod platforms and get door/window status alert via 2G/3G/4G/Wi-Fi. It can be connected to other devices to set up scene mode
2. Features
   • Support standard protocol IEEE802.15.4;
   • Lock/unlock status alert, knocking at door alert on mobile phones or tablets;
   • Low power alert
3. Application
   The door/window sensor can be applied at home, office for the purpose of security. It could be programmed in scene mode to get door/window status, and prevent unidentified intruder
4. Product Parameters
   • Appearance specification
     

     Appearance	Parameters
     Size	73x 41 x 10mm
     Color	Aluminum, sand blasting
     Weight	40g

   • Hardware specification
     

     Item	Hardware Specifications
     Chip	CC2530F256
     Button	The device is ready for being added in the system when you press the button for 6 seconds.
     Indicator	– The green light flashes twice indicating the device is connecting to the network- The green light flashes three times indicating the device is ready
     Antenna	Built-in 2.4 G PCB antenna
     ZigBee
     Wireless standard	IEEE802.15.4
     Wireless output power	4.5dBm(max)
     Wireless receiving sensitivity	-97dBm(min)
     Wireless coverage area	30m

   • Software specification
     

     Item	Software Specifications
     Door/Window sensor	Lock/unlock alert Knocking at door alert
     Battery detection	Remind users to replace the battery when it’s low.
     Firmware upgrade	Upgrade firmware via the serial port Knocking at door alert

5. Product functions
   

   Features

   l The door and window’s lock/unlock status could be detected and displayed on the APP.

   l Knocking at door alert could be displayed on the APP.

   l Can be programmed to scene modes (e.g. Home/Away Mode, On Duty/Off Duty Mode, etc.)