SMART LOCK


Product introduction

  1. Introduction
    The smart lock is a smart device with a built-in ZigBee module. The device can replace normal locks used at home or other private and public places. Users can install a SparxSmart APP on their iOS or Android platforms to unlock/lock door via 2G/3G/4G/Wi-Fi.
  2. Features
    • Support standard protocol IEEE802.4
    • Support5 methods to unlock/lock: App, fingerprint, password, keycard, keys.
    • Can unlock/lock on APPs ( Support iOS and Android)
    • Check status: open, close, alert, battery level
    • Support GPS navigation by voice, broadcast timekeeping, and real-time alert.
  3. Application
    The smart lock can be applied at home, office or other public and private spaces
  4. Product Parameters
    • Appearance specification
      Appearance Parameters
      Size 318.9×80.1×31.9mm
      Weight 3500g
    • Hardware specification
      Item Hardware Specifications
      Chip CC2530F256
      Lock by fingerprint Max: 100 fingerprints
      Lock by password Yes
      Lock by keycard Yes
      Unlock by keys Yes
      Working voltage 4.8~6.5V
      Static current 20~70uA
      Working current 70mA
      Zig-bee
      Wireless standard IEEE802.15.4
      Wireless output power 4.5dBm(max)
      Wireless receiving sensitivity -97dBm(min)
      Wireless coverage range 30m
    • Software specification
      Item Software Specifications
      Connect to server Enter admin password to go to the admin management interface, and press 0 to start to connect to the server. Then a voice prompt will tell you when the lock is added to the system.
      Firmware upgrade Upgrade via the serial port
      Record unlock data Record new password, new fingerprint, new keycard
      Enter into record interface On APP
      Inquire lock data Check data recorded
      Alert Intruder alarm, Lower power alert
  5. Product functions
    Features
    l Five methods to unlock/lock: by APP, Password, Fingerprint, Keycard, Key.
    l Can unlock/lock door on APPs ( Support iOS and Android platform )
    l Can be programmed to scene modes (e.g. Home/Away Mode, On Duty/Off Duty Mode, etc.)
  6. Product requirements
    Working Environment Requirement
    Storage Temperature -20℃~+60℃
    Operating Temperature -10℃~+50℃
    Humidity 0~90%, Non-Condensing
  7. Installation
    Door thickness: door frame ≥110mm, 40mm≤door thickness≤120mm (Accessories are needed if requirements can’t be matched.)